JSHD Three Position Enabling Devices
|
Standard Features and Options
|
|
|
The 3-Position Enabling Device can have up to two auxiliary buttons on the front and top to be used for any functions the user desires. Common functions such as jogging, start/stop, up/down or safety relay reset are achievable with one hand while maintaining the safety function.
|
Enabling Device with Top and Front Buttons
|
Enabling Device with Front Button Only
|
Enabling Device with Top Button Only
|
Enabling Device with No Auxiliary Buttons
|
Features
|
Choices
|
Details
|
Additional Notes
|
Auxiliary Buttons
|
None, Front Only, Top Only or Both
|
|
|
LEDs
|
With or Without
|
|
|
Interface Connections
|
Connector Cable Only
|
Connector Styles
8-Pin Mini, 4-Pin Micro DC or 5-Pin Micro DC
|
Optional Interconnect Cables also available
|
| |
Cable Options
Type of Cable
Length of Cable
End Termination
|
PVC or PUR
Flying Lead or Connector
|
Bottom Plate
|
Large or Small
|
Large - Standard
|
|
|
|
LED Options
One green LED and one red LED are available as function indicators for the Enabling Device.
|
Position 1
(Red LED)
STOP Function
Enabling Button
Not Pressed or Released |
Position 1
(Green LED)
START Function
Enabling Button
Pressed to the Middle Position |
Position 3
(Red LED)
STOP Function
Enabling Button Pressed Down
Fully Past the Middle Position |
|
Function Sequence
The function sequence of the Jokab Safety Enabling Device works as follows:
Position 1
STOP Function:
Enabling Button Not Pressed or Released
Position 2
START Function:
Enabling Button Pressed to the Middle Position
Position 3
STOP Function:
Enabling Button Pressed Down Fully Past the Middle Position
When the Enabling Device is cycled to position 3, the start function in position 2 is not reinitiated when the enabling button returns from position 3 to position 1.
|
|
Bottom Plate
The Jokab Safety Enabling Device comes standard with a large bottom plate with provisions for mounting the actuators from the pendant holster JSNA-JSM-2A accessory. The large bottom plate accommodates both 4 pole and 8 pole connection types.
 |
|
Connection Types
|
8 Poles Male Mini Series Size II Plug with Cable
Standard cable lengths of 20, 30 or 40 feet in oil resistant PVC and 20 or 30 feet in PUR cable. (8MP Designator)
|
4 Poles Male Micro DC (M12) Plug with Cable
Standard cable lengths of 6, 10 or 15 meters in oil resistant PVC. (4MP Designator)
|
8 Conductors - Cable Only
Standard cable lengths of 20, 30 or 50 feet in oil resistant PVC, 18AWG wire. (8C Designator)
|
4 Conductors - Cable Only
Standard cable lengths of 16, 10 or 15 meters in oil resistant PVC, 18AWG wire. (4C Designator)
|
8 Poles Male Mini Series Size II Receptacle
(8MR Designator)
|
4 Poles Male Micro DC (M12) Receptacle
(4MR Designator)
|
Connection of Enabling Device to Pluto Safety PLC
|
 |
