Quick-Guard E^® - Designed on Location

Quick-Guard E is installed fast and cost effectively because it only consists of patented net-locks, welded mesh, panels of polycarbonate, u-profiles and fence posts (profiles with floor brackets). All parts for Quick-Guard and pre-assembled doors are delivered immediately from stock. The few components of the fencing system make it easy for you to custom build and install the fencing system yourself.

The strength of the fencing system originates from the fact that the welded mesh and/or panels of polycarbonate are ‘locked’ into the profile. The outer wire of the mesh is locked by uniquely designed ‘netlocks’ into the profile making the fixing virtually as strong as being welded.

Quick-Guard E is easy to assemble and to angle.

The polycarbonate panels are locked in with specially designed infill-locks, which have (according to our tests) been found to be just as strong as the mesh net-lock system. If you want more stable fencing posts, you can choose a sturdier profile with the measurements 44 x 88 mm instead of the standard profile which is 44 x 44 mm.

It is always easy to combine Quick-guard E with Quick-Guard Standard to achieve a complete system. It is also easy to adjust and modify the guarding system when production equipment is modified and/or moved.

It is easy to remove a section. For example when the machine needs service.

Step1

Premount floor fixtures on vertical posts. Mount fixtures by first loosening the screw counter-clockwise. Then tighten the screw clockwise in the usual way. The nut will then automatically locate into the correct position and mechanically lock the fixture into profile.

Step 2

1. Insert distance screw into the post profiles.
2. Place the lower u-profile on the mesh.
3. Push the mesh into the profile and fix the mesh with NL2, Netlocks.
4. Fix top u-profile in place either before or after inserting the mesh.

Step 3

Assemble the next section. The distance between the posts can be adjusted some mm after the mesh is locked in with the Netlocks. The mesh can be angled up to 45º without using hinges (JSM 35-K).

Step 4

Lock the top of the mesh using Netlock NL3. This way the mesh is secured, stabilized and electrically grounded. Grounding is needed when electrical devices or cables are assembled on the mesh.