Standard and Special Function Blocks for Pluto Manager

The safety designer has full freedom to program safety functions or to use TV approved predefined safety functions.

Standard Function Blocks

1. Two-channel function with input for start.
2. Two-channel function with test input.
3. Two-channel function with test and reset inputs.
4. Single-channel function with start input.
5. Single-channel function with start and test input.
6. Single-channel function with reset and test input.
7. Two-channel function with time limitation (equivalent to JSHT2). The timer starts when both inputs are on.
8. Two-channel function with time limitation (equivalent to JSHT2). The timer starts when one of the inputs is on.
9. Single-channel pulse function (intended for inner reset).
10. Two-channel pulse function (intended for inner reset).
11. Muting function with two-channel input.
12. Muting function with single-channel input.
13. Muting function with two-channel input time limitation and timer for simultaneous activation of inputs.
14. Safety function with two-channel input and integrated two-channel muting function.

15. Two-hand control for actuators with NO/NC + NO/NC contacts.
16. Counter which counts up to preset value.
17. Counter which counts down from preset value to 0.
18. Off-delay.
19. Muting lamp_Q16.
20. Muting lamp_Q17.
21. Muting lampW_Q16, with possibility to set the number of watts.
22. Muting lampW_Q17, with possibility to set the number of watts.

Special Function Blocks

1. Program Library with program blocks for eccentric presses.
2. Safe absolute encoders.
3. Pulse transducer cam.
4. Customized special blocks.