JSNY10 Rope Pull Switch - Ordering Data
|
|
JSNY10
|
|
Switch
|
|
|
|
|
JSNY10-K
|
|
Mounting Kit
|
|
|
25 m
|
Plastic-coated steel cable wire
|
|
1 piece
|
Wire turnbuckle
|
|
4 pieces
|
Thimble
|
|
4 pieces
|
Wire clamp
|
|
5 pieces
|
Eyebolts with nuts
|
|
|
JSNY10-W3
|
|
Wire plastic-coated red
|
|
3 mm/4 mm (core/sleeve) per meter
|
|
|
JSNY10-S6
|
|
Eyebolt
|
|
M6x50
|
 |
|
JSNY10-M6
|
|
Nut
|
|
M6 (to eyebolt)
|
 |
|
JSNY10-V6
|
|
Wire turnbuckle
|
|
M5x50
|
 |
|
JSNY10-L3
|
|
Wire clamp, duplex
|
|
|
 |
|
JSNY10-T4
|
|
Wire thimble
|
|
|
 |
|
 |
|
Rope supports should be attached at a height of at least 20-25mm above the surface where the switch is to be installed.
Turnbuckles may be used to tune the pull-rope system to the correct tension.
|
|
A medium operating temperature should be maintained during installation.
The rope should be pulled heavily several times, then the tension of the rope should be readjusted to compensate for the elongation of the rope resulting from thimble distortion.
|
