Tina 1A, 2A, 3A, 4A, 6A, 7A and 8A

Technical Data

Manufacturer.................................. JOKAB SAFETY

Ordering Data.... Tina 1A, 2A, 3A, 4A, 6A, 7A & 8A
                                    (for M12 contacts and cables
                                          see component order list)

Safety Category with Vital
(according to EN 954-1).......................................... 4

Color.................................................................... black

Material...................................... based on polyamid

Current Consumption
Tina 1A and 2A................................................. 17 mA
Tina 3A, 6A and 7A.......................................... 47 mA
Tina 4A............................................................... 10 mA
Tina 8A............................................................... 15 mA

Max. connected
units/cable length........................ see data for Vital

Tina 3A, 6A and 7A
Current through safety device contacts....... 12 mA
Short circuit current between contacts........ 10 mA

Max. Cable Length......... see Vital Technical Data

Temperature Range
Operation........................................... -10ºC to +55ºC
Storage............................................... -30ºC to +70ºC

LED on Tina 1A, 2A, 3A, 6A and 7A
Green.................. Safety device ok, safety circuit ok
Flashing..... Safety device ok, safety circuit broken
Red............ Safety device and safety circuit broken
                                     (Red, not for Tina 1A and 2A)

Connections
Brown (1)..................... 17 - 27 VDC, ripple +/- 10%
White  (2)............................. dynamic input signal in
Blue    (3)........................................................... 0 VDC
Black  (4)........................ dynamic output signal out
Grey    (5) (not Tina 1A)................. indication output
                                                                   (see below)
                                 (24 VDC when LED is green or
                   flashing/tolerance -2 VDC/10mA max.)
                                                    (0 VDC when LED is
                                                red/tolerance +2 VDC)

               Connection block 5 - 8 Tina 4A status for
              connected unit according to connection 5
                              Connection block 5 - 12 Tina 8A
                                             see above 5 - 8 Tina 4A

             Note: Shielded cable is recommended
             between cabinet and Tina 4A/8A. Shield
             to be connected to ground in cabinet only.

Protection Class
Tina 1A, 2A, 3A and 6A..................................... IP 67
Tina 7A................................................................ IP 20

Connection - Tina 1A, 2A, 3A, 4A, 6A, 7A and 8A

In order to achieve category 4 according to EN 954-1 the connection to the safety device must be made inside an enclosure - I.e. safety switch, E-stop...

See connection example HH3300D

See connection example HH3300D

See connection example HH3303A

See connection example HA3307A

See connection example HH3304A

See connection example HH3300D

See connection example HH3300C