The Safest Solution during Troubleshooting, Programming and Testing
When you’re planning a machine safety solution that will help your company comply with the RIA 15.06 Standard consider the JSHD4 Three-Position Enabling Device. This hand-held device provides the highest level of protection for your employees by allowing the operator to be in control at all times. In addition, no one will be able to start the machine from the outside when the operator has stopped the machine with the Three-Position Enabling Device.
The pendant’s distinct and redundant middle “run” position insures that the equipment can be stopped either by squeezing or releasing the enabling button. This unique device provides the extra margin of safety needed when conducting set-up, programming, testing, troubleshooting or servicing robotic or automated equipment.
Ergonomic Design
The Jokab Safety Enabling Device has been ergonomically designed to allow multiple functions with one hand. The enabling button is actuated by grasping with the fingers to a distinct middle position, making it easy to hold for long periods of time. The enabling button incorporates two individual 3-position switches inside the rubber cover for redundancy. The enabling device can have up to two extra buttons on the front and top to be used for software functions such as start/stop, forward/backwards or up/down. They can also be used to provide a reset for a safety relay or any other function the user requires.
Technical Data
- ManufacturerJOKAB SAFETY
- Ordering Data/Article Numberssee components list
- MaterialPolyamid 6.6
- Electrical Contact Ratings
- Three-position button30 VDC, max. 0.5 A
- Extra button50 VAC/DC, max. 0.5 A
- Operating Temperature-10ºC to +50ºC
- Mechanical Life1 million cycles to middle position
- Function Indication
- StartGreen LED
- StopRed LED
- Protection ClassIP 65
|
|
Enabling Device with 8-Pin Receptacle, Extension Cable with Receptacle, and Jokab RT9 Safety Relay
Safety Level
A high level of safety can be achieved with the enabling device when it is used in conjunction with a safety relay. Although the Enabling Device has two 3-position switches for redundancy, a safety relay should be used to monitor the individual switches and interface cable for failure in order to achieve a control reliable system.
The Jokab Safety RT6, RT9, JSBT4 safety relays can be used in conjunction with the Enabling Device.
Regulations & Standards
The Enabling Device is designed and approved in accordance with the following relevant standards: EN 292-1/2, EN 60204, IEC 204, VDE 0110, VDE 0113, BS 2771.
Approvals
  
For further information including options and connection types click here.  JSTD4 Three-Position Enabling Device
|
JSHD4 Enabling Devices
