|
Dalton is a locking unit that is intended for use in preventing unnecessary process stoppages, i.e. it is not a safety lock. It can be used either as a free-standing lock or integrated with Eden as a safety sensor. In the unlocked state the door is held closed by a ball catch and locked mechanically. If necessary,the holding force of the ball catch can be adjusted.The unit only permits locking if the ball catch is secured and when the Eva is in contact with the Adam (depending on the variant). When an input is supplied with voltage, the ball catch is locked.
Dalton is easily connected with an M12 connector.The junction block can also be used for distribution of both the safety and locking functions. The Dalton status is indicated by LEDs and can also be read by a PLC via the information output.
Installation
Dalton can be installed with its opening in two directions. When Dalton is used in conjunction with Eden the number of DA1 washers varies depending on the angle at which the tongue approaches the ball catch. This is to optimize the sensing distance for the Adam and Eva.
|
|
Applications
Features
- Small and robust
- Integrated with Eden
- Flexible installation
- High enclosure classification - IP 67
- Withstands severe environments
- Low current consumption
- Status information with LED on the lock housing and in the cable connection
For further Information including technical data and connection examples click here  Dalton, The Intelligent Process Lock
|
Dalton Process Lock
