Eden - Adam and Eva - is a non-contact safety sensor for use on interlocked gates, hatches, etc. A coded signal is transmitted from the control device Vital, or from the Pluto Safety PLC via Adam to Eva, which modifies the signal and sends it back again. The maximum sensing distance between Adam and Eva is currently 15mm +/- 2 mm.

Up to 30 Edens can be connected in series to Vital and still achieve the same safety level in the safety circuit. It is also possible to connect safety light beams and E-stops in the same safety circuit. Adam is available with cable lengths up to 20 m and with M12 connectors.

The LED on Adam provides indication of four different conditions, contact/non-contact between Adam and Eva, alignment, and safety status. The same information is also available via the Adam connection cable. For harsh environments, Jokab Safety offers Eden E-Adam E and Eva E. There is also a coded version Eden EC, Adam EC and Eva EC.

Flexible Mounting

The ability to operate at distances of up to 15mm and at different detection directions allows a wide range of mounting possibilities.

Applications

• Doors and Hatches
• Position Control
• Sector Detection
• Slot Detection

For further information including technical data and connection examples click here. Eden Non-Contact Safety Sensor

Eden Non-Contact Safety Sensor

Features

• Safety category 4 according to EN 954-1/EN ISO 13849-1 together with Vital or Pluto
• Non-contact detection, large sensing distance 0 - 15 mm +/- 2 mm
• Up to 30 sensors connected in series at safety category 4
• Versatile mounting, 360º detection
• Protection class IP67 (Eden E - IP69K)
• Signal will penetrate through non-metallic materials (wood, plastic, etc.)
• Safety light beams, E-stops and Eden can be connected in the same safety circuit together with Vital or Pluto meeting safety category 4 (EN 954-1/EN ISO 13849-1)
• LED indication on sensor and status information via the connector cable
• Small hysteresis (< 1mm)
• Eden C and Eden EC - available coded versionsSafety category 4, dynamic safety circuit

Approvals